AUSTRALiA GROUP

 
NiGHTBRiGHT-NiGHTSHiNE......WORLD LEADERS IN COLOURED PHOTOLUMINESCENT TECHNOLOGY, PRODUCTS AND ENHANCED EMERGENCY EVACUATION SYSTEMS ......CONTACT US NOW!

  
PL SIGNS-SPECIAL
  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NiGHTBRiGHT~NiGHTSHiNE NiGHTLiNE

- Two Component Photoluminescent -

Safety Egress Floor Marking Demarcation System

NiGHTBRiGHT~NiGHTSHiNE's NiGHTLiNE coating system allows us to apply our PL technology to virtually any paintable surface. Our system provides a range of HIGH VISIBILITY FLUORO colours by day with a range bright Photoluminescent "Glow in the Dark" colours when the lights GO OUT!

NiGHTBRiGHT~NiGHTSHiNE NiGHTLiNE is proudly Australian made and owned!

 

With our exclusive double-barrel cartridge, the dual cartridges isolate the two resin components until needed.

The compartments are isolated so there is no cross-contamination of materials. Mixing occurs as the materials are dispensed through the motionless mixing nozzle.

This system has significant advantages over traditional two-component mix products or single component water base or vapor cure systems:

  • Perfect mix ratio every time

  • No air entrapment

  • No problem with product gelling due to short pot life

  • Single coat system versus 3-5 coats

  • Dry time is quick and walk-on in max 4 hours*

  • One coat will pass all brightness ratings required by building codes

  • Zero VOCs and 100% solids
     

RANGE OF APPLICATION

 

  Floor demarcation marking for egress system

  Inlays in wood and Aluminium

  Dispersed into tile, glass, terrazzo a

  Fill for separation and breaks in substrates or for hollowed areas

  Custom design

DESCRIPTION

DESCRIPTION

NiGHTBRiGHT~NiGHTSHiNE NiGHTLiNE is a 100% solids, high viscosity, non-shrink, two component liquid glow system formulated for use on most building substrates. NiGHTBRiGHT~NiGHTSHiNE NiGHTLiNE will bond to wood, glass, masonry, concrete, steel and like substrates.

FEATURES

 

  100% solids, no VOC

  Good weatherability

  Easy and accurate mixing cartridge

  Fast cure

  Excellent bonding to various substrates

  Various application capabilities

PROCESSING

PROCESSING

 

NiGHTBRiGHT~NiGHTSHiNE NiGHTLiNE is composed of two components. The mixing ratio by volume is 1:1 (A:B).

 

The use of the NiGHTBRiGHT~NiGHTSHiNE NiGHTLiNE cartridge system with a hand operated pneumatic gun makes the application clean and easy. The design of the gun will help assure a correct mixing ratio.

 

The mixing takes place in a static mixer, which delivers the mixed product to the required surface. If a cartridge is not used up the static mixer will need to be replaced prior to the next use.

 

* Do not add solvents to the product.

SURFACE PREPARATION

SURFACE PREPARATION 

 

All surfaces must be sound, clean and dry. Remove dust, grease, waxes, oils, curing compounds, coatings and any other contaminants.

 

With all applications a primer is applied to the surface area before application of NiGHTBRiGHT~NiGHTSHiNE NiGHTLiNE

 

Once the primer is applied our process allows for approximately 1- 2 hours before the application of the NiGHTBRiGHT~NiGHTSHiNE NiGHTLiNE, depending on climate. Wait times on the primer will be longer in cold weather or with high humidity.

*TESTING THE SURFACE BEFORE FULL APPLICATION IS ALWAYS PARAMOUNT!

COVERAGE

Application losses may vary according to surface substrate and the method of application and is always  taken into account when estimating the quantity of product needed.
 

PRECAUTION

Observe all labels, MSDS, and instructions before using this product and equipment. Protect your health! Provide adequate ventilation in working area. When working with
NiGHTBRiGHT~NiGHTSHiNE NiGHTLiNE, it is strongly suggested to wear safety clothing, gloves, and safety goggles. A full face shield is also recommended. Spills and blow-outs do happen! Consider persons and property in proximity to the application area to prevent damage or injury.

# Store all materials and equipment safely out of the reach of children.

# Refer to MSDS sheets for instructions if material comes in contact with eyes or skin.
 

NOTE

The data contained herein is furnished for information only and is believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods over which we have no control. It is the users responsibility to adopt such precautions for the safety of property and persons.
 

APPLICATION

All site work and applications are done using our fully trained and pre-qualified installers.

Depending upon the site requirements, layout and in particular access there are a number of processes and equipment that we use.

For stairs and landings in Fire Escapes for example we can use either a masking tape or a Polypropylene stencil which we design and manufacture for the site using laser profiling to ensure dimensional standards [which are critical for safety egress systems] are maintained during installation throughout the site.

For more 'open areas & sites' such as walkways, hallways and path marking systems in hospitals, nursing homes, commercial and industrial complexes office buildings, warehouse, train and bus stations etc a number of application systems are available.

MASKING TAPE:

STEP ONE:

We place masking tape on the surface area where NiGHTBRiGHT~NiGHTSHiNE NiGHTLiNE is to be applied. Use firm pressure when applying tape to assure that you have good contact with the surface area, this will help to eliminate the primer or NiGHTBRiGHT~NiGHTSHiNE NiGHTLiNE from traveling under the tape.  (A laser line will aide to make straight lines)
 

STEP TWO

Our "Primer" is always applied to the surface area before the application of NiGHTBRiGHT~NiGHTSHiNE NiGHTLiNE. We apply primer to the surface area between tapes and allow primer to dry completely. Depending on the substrate it may be necessary to apply two light coats rather the one thick coat.
 

STEP THREE

Prepare NiGHTBRiGHT~NiGHTSHiNE NiGHTLiNE Dispense a small amount of material this will insure we have a proper mix of material before you begin to apply NiGHTBRiGHT~NiGHTSHiNE NiGHTLiNE.
 

STEP FOUR

Dispense material as required to meet the dimensional requirements of the marking down the middle of the tape.
 

Note the majority of our applications are normally completed using a mechanical system but again depending on site requirements some applications may be done manually as shown above applying primer and below applying top coat;

STEP FIVE

After the material has been dispensed between the stencil tapes, the stencil tape can be removed immediately. Do not wait more than 2 minutes to remove the stencil tape. Remove one side of the stencil tape at a time, pulling the stencil tape towards the centre of the strip. This will keep the material from spreading outward from the centre.
 

The NiGHTBRiGHT~NiGHTSHiNE NiGHTLiNE  is cured for use once it is dry to the touch and a fingernail impression is hard to make. For a area of general use it is advised to block the area off for 4 hours.

For an area of high traffic it is advised to block off the area for 8 hours. These times may vary depending on ambient temperature.
 

CLEAN UP

Dispose in accordance with current applicable local, state and federal regulations.
Tools and equipment are best cleaned immediately after use.
Use acetone to clean tools and equipment, uncured material may be wiped up with a clean cloth.
Do not use solvents.
 

OUR EQUIPMENT IS- 100% Australian Owned and Manufactured

Technical Information:

Note: Product and Material Safety Data information is available and supplied to customers as part of our quoting, sales and application procedures.

Due to the upcoming launch of our NEW 'state of the art' NEXT GENERATION PRODUCTS some technical information is currently not available.

 

NiGHTBRiGHTNiGHTSHiNE INTERNATIONAL

A MEMBER OF

THE NIGHTBRIGHTNIGHTSHINE GROUP

WORLD LEADERS IN PHOTOLUMINESCENT TECHNOLOGY

& SAFETY EGRESS SYSTEMS

HEAD OFFICE: Gold Coast - Queensland - Australia

Copyright 2007 - NiGHTBRiGHT~NiGHTSHiNE Australia  

 All material and content remains the property of the NiGHTBRiGHT~NiGHTSHiNE
and may not be used without permission or consent of the
publisher.

 

World leaders in "COLOURED" Photoluminescence